Home

Suzuki GT750

Other bikes

Route 66 trip

Other Stuff

Kettle forum

Contact



FaceBook





Parts for sale

If you are interested in any of these items, or would like more information, please e-mail me using the contact link on the left hand menu or can see some of the parts listed on my eBay Shop

These items are new reproductions parts, not refurbished old parts, some of the parts like the fuel tap bowls are also correct part for the GT550 GT380 GT250.

All these parts are produced in the UK, I make all the parts except for the gaskets, which are made by a company in the UK.

If you need any items that are not listed or you need a 1 off made, please contact me for a price.


Click the images below for full sized pictures most are around 1200 x 900

   

Suzuki GT750 stainless brake pistonStainless steel brake caliper piston for the Suzuki GT750 GT550 GT380 and GT250. The pistons have been made hollow with a cap dimensionally the same as the original, but made from stainless rather than mild steel.

Suzuki GT750 stainless brake pistonBeing stainless they do not go rusty like the originals.

the cap is pressed in to the piston and can not easily be removed once fitted.


Suzuki GT750 stainless brake banjo boltStainless steel brake banjo bolts, made to the same size as the originals and mirror polished.

Original one on the right for comparison.

Suzuki GT750 stainless brake banjo boltThese do not rust or tarnish .

Suzuki GT750air filter gasketAir filter gaskets, water jet cut from adhesive backed Neoprene/EPDM sponge

Available from my eBay store

Suzuki GT750 air filter gasketThey can be stuck in side the air box or the air filter cage.

Suzuki GT750 stainless boltsReproduction of the oil pump control rod olives for the GT750 LMAB models, CNC machined in the UK, from Teflon #16762-31210

Available from my eBay store

 

Suzuki GT750 stainless boltsI profiled the outside on the CNC lathe and the 2mm slot was machined on the CNC mill.

 

Suzuki GT750 stainless stopper plateStainless steel stopper plates.

Used in the brake calipers on the GT750, GT550, GT380 ect.. to stop the brake pad from spinning inside the caliper.

Available from my eBay store

Suzuki GT750 stainless stopper plateStainless steel stopper plates fitted to spare caliper.

 

Suzuki GT750 carb bowl drain plugMachined some new brass drain plugs for the BS40 CV carbs

Suzuki GT750 carb bowl drain plugThese have a 12mm flange on the hexagon and a 8.2mm step to locate the copper washer central and the flange gives a better area to seal. 3 drain plugs and 3 copper washers.

Suzuki GT750 rear sprocket boltsStainless steel rear sprocket bolts, used on the GT750 GT500 and GT380 original part number #09119-10002 superceded by #09105-10001

 

 

Suzuki GT750 rear sprocket boltsI know you can't see the head of the bolt when fitted, but I had to polish it.

Available from my eBay store

Suzuki GT750 fuel tap spacerMachined the aluminium fuel tap spacer 44380-31250 mainly used on the KLMA models I think

£21 plus postage

Suzuki GT750 fuel tap spacerCurrently testing some sample fuel tap seals that I have had made from fuel resistant rubber t go with the spacers.

Suzuki GT750 brass fuel tap bowlNew brass fuel tap ( petcock ) bowl for the GT750 GT550 KLMAB

Can see more fuel tap bowls here

Suzuki GT750 fuel tap bowlNew reproduction aluminium fuel tap bowl for the GT750 KLMAB Both the brass and aluminium bowls have magnets pressed inside to collect crap in the fuel. This bowl also fits the GT550, GT380 & GT250

Kawasaki H1 H2 fuel tap bowlFuel tap bowls designed for the early Suzuki GT J & K models, these can also fit the later fuel taps, a few people have bought these for later models as prefer the deeper bowls.

 

 

Kawasaki H1 750 fuel tap bowlFuel tap bowl for a Kawasaki H2 750 & H1 500

The one on the right is the original one, not too bad condition considering the age.

 

Kawasaki H1 H2 fuel tap bowlThe fuel tap bowls also have the magnets in the base like the one I made for the Suzuki GT's

 

Suzuki GT750 oil pump gasket The gasket for the oil pump top, not sure if Suzuki has sold separately before or just not sold sold for a long time.

£4.50 plus postage

Suzuki GT750 oil pump gasketThese gaskets 16110-31010 also fit the GT550 and GT380 currently have about 80 left, always handy to have a few spare.

Suzuki GT750 stainless master cylinder plate2mm neoprene rubber gasket for the starter motor cover.

£9.50 plus postage

Suzuki GT750 stainless master cylinder plateProfiled with a water jet cutter, water jet is 0.1mm dia and as can see finish is very good and accurate to within 0.2mm

Suzuki GT750 stainless master cylinder plateStainless steel engine brackets with the Suzuki S, #41591-31000 & #41590-31200

Suzuki GT750 stainless master cylinder plateStainless steel front wheel torque arm tab washers for GT750J GT550J and GT380J

#09167-10004

Suzuki GT750 stainless master cylinder plateStainless steel master cylinder reservoir plate with the Suzuki "S" #59685-33600

Suzuki GT750 stainless master cylinder plateStainless steel master cylinder reservoir plate standard style one next to custom Suzuki "S" option #59685-33600

Suzuki GT750 stainless fuel tap plateThis is the LMA style fuel tap plate, the body is the same as the A/B and both plates are interchangeable.

Other fuel tap plates

Suzuki GT750 stainless fuel tap plateA/B Fuel tap plate fitted, with the engraved text filled with red and black paint.

Suzuki GT750 stainless fuel tap plateJ/K fuel tap plate, engraved text can be filled with black paint, which I think looks the best on these.

Suzuki GT750 stainless fuel tap plateFilled with black paint, just waiting for the final polish off to remove the paint smear.

 

Suzuki GT750 stainless fuel tap plateStainless steel front disc tab washers.09169-08016

See them fitted at the bottom the page

Suzuki GT750 stainless fuel tap plateStainless steel rear sprocket tab washers, able to supply for the GT750 09169-10007

For the GT250 GT380 GT500 T500 GT550 09169-10006

Suzuki GT750 stainless pipe clampStainless steel overflow pipe clamp for CV carbs.

 

Suzuki GT750 stainless pipe clamp

 

Suzuki GT750 stainless tab washerStainless steel tab washers for the LMAB CV carbs.

 

Suzuki GT750 stainless tab washerTab washer fitted to butterfly shaft.

Suzuki GT750 stainless engine bracketsStainless steel engine brackets. can be supplied polished or powder coated black.

#41591-31000 & #41590-31200

Suzuki GT750 stainless engine bracketsTwo versions, this one shows the rear brake light switch up the same as original

Suzuki GT750 stainless engine bracketsFront bracket fitted to my bike.

Suzuki GT750 stainless engine bracketsShowing the rear bracket fitted to my bike, have welded the small bracket the rear brake light switch fits to, upside down from the original.

Suzuki GT750 stainless carb bracketsThese carb brackets for L M A & B models are precision made from stainless steel and mirror polished, they will not rust and unlike the originals do not need to be re-zinced or re-chromed to stay looking good

 

Suzuki GT750 stainless carb bracketsFor a pair of the brackets please e-mail me using the link on the left hand menu if you are interested.

Suzuki GT750 stainless carb brackets

Suzuki GT750 stainless carb brackets

Suzuki GT750 stainless seat lock setA stainless steel set lock set to replace the standard roughly finished originals.

 

Suzuki GT750 stainless seat lock setStainless parts fitted in seat lock

Suzuki GT750 stainless seat lock setSeat lock body has been powder coated in cobalt candy, I can also strip your seat lock and powder coat the body.

Suzuki GT750 stainless seat lock setStainless steel speedo drive dust seal.

Part number 54871-31000

Suzuki GT750 stainless seat lock setStainless steel rear shock spacers, set of 12 washers.

Make 2 different sets depending if you have a rack/grab rail fitted or not.

 

 

Suzuki GT750 stainless seat lock setStainless steel dome nuts for the rear shocks.

Back to Suzuki GT750Astrax Home  
Last updated .. 29 December, 2017